Chauvet MotionOrb, Руководство пользователя

Страница: 23 / 96

4. Operation
MotionOrb™ User Manual Rev. 1 Page 23 of 96
DMX
Configuration
DMX configuration prepares the MotionOrb™ for use with a DMX controller. DMX configuration
involves doing the following:
•
Activating DMX mode
•
Selecting the DMX personality
•
Selecting DMX address
•
Setting the MS address
The MotionOrb™ has different DMX personalities for varying levels of control with a DMX
lighting controller. The following sections describe how to configure the MotionOrb™ for use
with a DMX controller.
For more information about DMX, see the CHAUVET® DMX Primer, available at
http://www.chauvetlighting.com/downloads .
For information on available lighting controllers, see the CHAUVET® website at
www.chauvetlighting.com .
DMX Mode and
Personality
The MotionOrb™ has 4 DMX personalities as described below: The simplest one has 9
channels and does not have pixel mapping. The other 3 personalities are for pixel mapping.
There is a 165-channel, a 240-channel, and a 315-channel pixel mapping personality. Each one
is designed for a specific length of MotionOrb™.
The basic MotionOrb™ is 2 meters long and has 165 orbs, so it uses the 165-channel DMX
personality.
To activate DMX mode and select the DMX personality, do the following:
1. Press <MENU> until Dmx shows in the display.
2. Press <ENTER> until DMX Mode shows on the top line of the display.
3. Use <UP> or <DOWN> until the desired DMX mode shows on the bottom line of the display.
4. Press <ENTER> . Dmx shows in the display.
DMX Starting
Address
When selecting a starting DMX address, consider the number of DMX channels needed for the
selected DMX personality. Choosing a starting address that is too high restricts access to some
of the product’s channels.
The basic MotionOrb™ product uses either 9 or 165 channels, depending on the DMX
personality. The highest configurable DMX address in 9-channel personality is
504 . The highest
configurable DMX address in 165-channel personality is 348 .
For more information about DMX, download the CHAUVET® DMX Primer from the CHAUVET®
website
http://www.chauvetlighting.com/downloads .
To set the DMX starting address, do the following:
1. Press <MENU> until Dmx shows in the display.
2. Press <ENTER> until Address shows on the top line of the display.
3. Use <UP> or <DOWN> until the desired DMX address shows on the bottom line of the
display.
4. Press <ENTER> . Dmx shows in the display.