Chauvet Motion Facade LED, Руководство пользователя, Страница: 9 / 13

MotionFaçade™ LED User Manual (Rev. 6) Page 9 of 13
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
because products in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
Sound
-
Active
Mode
To enable the Sound
-
Active mode, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER> .
5. Turn the music on until the product responds to the beat of the music.
The product will only respond to low frequencies of the music (bass and drums).
Automatic Mode To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until Automatic shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER> .