MinLasers RGX 2.0, FX 2.0, RBX User Manual
3
EN
Safety Instructions
The following notes include important safety information about the installation,
usage, and maintenance of this product.
•
Keep this User Manual for future consultation. If you sell this product to another user, be
sure that they also receive this document.
•
Always make sure that the voltage of the outlet to which you are connecting this product
is within the range stated on the decal or rear panel of the product.
•
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
•
Make sure there are no flammable materials close to the unit while operating.
•
Always install this product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect this product from the power source before cleaning it or replacing
fuse.
•
Make sure to replace the fuse with another of the same type and rating.
•
If mounting it overhead, always secure this product to a fastening device using a safety
chain.
•
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product
at higher temperatures.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to
repair the unit. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center.
•
Never connect this product to a dimmer pack.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Never carry a product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
•
Always avoid direct eye exposure to the light source when this product is on.
•
Lasers can be hazardous and have unique safety considerations. Permanent eye
injury and blindness is possible if lasers are used incorrectly. Pay close attention to
each safety REMARK and WARNING statement in this user manual. Read all
instructions carefully BEFORE operating this device.
•
Avoid direct eye contact with laser light. Never intentionally expose your eyes or others
to direct laser light.
•
This laser product can potentially cause instant eye injury or blindness if laser light
directly strikes the eyes.
•
It is illegal and dangerous to shine this laser into audience areas, where the audience
or other personnel could get direct laser beams or bright reflections into their eyes.
•
It is a U.S. federal offense to shine any laser at aircraft.
•
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
•
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service, please
contact the dealer nearest to you.
•
Avoid direct eye contact with laser light. Never intentionally expose your eyes or others
to direct laser light.
