Chauvet MAVERICK MK3 PROFILE, Руководство пользователя, Страница: 18 / 37

Page 14 of 33
Operation
Maverick MK3 Profile User Manual Rev. 2
Configuration (DMX, Art-Net™, sACN)
Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller.
Control Mode
The Maverick MK3 Profile works with wired DMX, WDMX, Art-Net™, and sACN control signals. To select
which protocol to use:
1. Go to the Settings main level.
2. Select the Control Mode option.
3. Select the desired protocol, from DMX , WDMX , ArtNet , or sACN .
Control Personalities
To set the control personality:
1. Go to the Personality main level.
2. Select the desired personality, from Dmx Mode 38 CH or Dmx Mode 54 CH .
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the Address main level.
2. Select the starting address ( 001 – 475 ).
• The highest recommended starting address for Dmx Mode 38 CH is 475 .
• The highest recommended starting address for Dmx Mode 54 CH is 459 .
Network Setup
The Network Setup settings control the IP address, subnet mask, and universe of the product.
IP Mode
To choose how the IP address is set:
1. Go to the Network Setup main level.
2. Select the IP Mode option.
3. Select the desired IP mode, from Manual (to set a custom IP address), DHCP (the IP address is
assigned by the connected network), or Static (the product uses a default, preset IP address).
Universe
To assign an Art-Net™ or sACN universe to the Maverick MK3 Profile:
1. Go to the Network Setup main level.
2. Select the Universe option.
3. Set the universe, from 000–255 (for Art-Net™) or from 001–256 (for sACN).
Manual IP Address
To set the IP address when the IP Mode is set to Manual :
1. Go to the Network Setup main level.
2. Select the Ip option.
3. Set the 4 values of the IP address from 000–255 .
Subnet Mask
To set the subnet mask:
1. Go to the Network Setup main level.
2. Select the SubMask option.
3. Set the 4 values of the subnet mask from 000–255 .
• See the WDMX Reset section for further setup of WDMX.
• See the Network Setup section for further setup of ethernet protocols (Art-Net™ or sACN).
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.