Chauvet LED Followspot 75, Руководство пользователя

Страница: 10 / 17

Page 10 of 17 LED Followspot 75 User Manual (Rev. 07)
Configuration
(DMX)
Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The LED Followspot 75 uses up to 3 DMX channels in its 3-channel DMX mode, which
defines the highest configurable address to 510.
If you are not familiar with the DMX protocol, you may refer to the
DMX Primer
section in
the
Technical Information
chapter.
To select the starting address, do the following:
1. Press <FUNCTION SELECT> until 001 shows on the display.
2. Press <UP> or <DOWN> to select your starting address.
DMX Channel Assignments and Values
3-CH
Channel Function Value Setting
1 Dimmer 000

255
0~100%
2 Color
000

031 White
032

063
Dark Blue
064

095 Yellow
096

127
Purple
128

159
Green
160

191 Red
192

223
Light Blue
224

255 Orange
3 Strobe 000

255
0~100%