4. Operating Instructions
9
10/9/2009 2:29 PM
Signal Linking (DMX)
The diagrams below illustrate the signal (DMX) linking for this fixture. This is used both in DMX mode
and when operating the fixtures in Master/Slave mode. Please see the diagram below for further
explanation.
Fuse Replacement
With a flat head screwdriver unscrew the fuse holder out of its housing, turning counter-clockwise.
Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse
holder back in its place and reconnect power.
Additional signal
(DMX) link out
First fixture
Second fixture
Third fixture
DMX controller
(only in DMX operation)
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.
The fuse is located
inside this fuseholder.
