Intimidator™ Spot 255 IRC User Manual Rev. 2
Page 17 of 24
Master/Slave
Mode
The Master/Slave mode allows a single Intimidator™ Spot 255 IRC (the master) to
control the actions of one or more Intimidator™ Spot 255 IRC units (the slaves) without
the need of a DMX controller. The master will be set to operate in either Automatic or
Sound-Active mode, while the slaves will be set to operate in Slave mode. Once set and
connected, the slaves will operate in unison with the master.
Configure the units as indicated below.
Slaves:
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Run Mode
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Slave
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select
Slave1
,
Slave2
,
Slave3
, or
Slave4
.
•
Select
Slave1
for 100% synchronized actions.
•
Select
Slave2
,
Slave3
,
or Slave4
for a delayed show with all heads in the
same direction but with a delay creating a wave effect.
7. Press
<ENTER>
.
8. Connect the DMX input of the first slave unit to the DMX output of the master.
9. Connect the DMX input of the subsequent slaves to the DMX output of the previous
slave.
10. Finish setting and connecting all the slaves.
Master:
1. Set the master to operate in either Automatic or Sound-Active mode.
2. Make the master the first unit in the DMX daisy chain.
•
Configure all the slaves before connecting the master to the DMX daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the
master.
•
Do not connect more than 31 slave units to the master.
Содержание Intimidator Spot 255 IRC
Страница 1: ...User Manual ...
