Page 14 of 24
Intimidator™ Spot 255 IRC User Manual Rev. 2
DMX8CH
(cont.)
Channel
Function
Value
Percent/Setting
6
Prism
000
ó
015 Open
016
ó
255 Prism on
7
Dimmer
000
ó
255 0–100%
8
Shutter
000
ó
003 Closed
004
ó
007 Open
008
ó
215 Strobe effect with increasing speed
216
ó
255 Open
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•
Connect the product to power.
Never connect a product that is operating in any standalone mode (either
Automatic or Sound-Active) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
Sound-Active
Mode
To enable the Sound-Active mode, do the following.
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Run Mode
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Sound
.
5. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To set the sound sensitivity, do the following.
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Setup
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Sensitivity
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select
001–100
, low to high.
7. Press
<ENTER>
.
Automatic Mode
To enable the Automatic mode, follow the instructions below:
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Run Mode
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Auto
.
5. Press
<ENTER>
.
Totem Mode
To activate the Totem Mode, do the following:
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Setup
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Totem Mode
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to choose
OFF
,
DOWN
, or
UP
.
7. Press
<ENTER>
.
Содержание Intimidator Spot 255 IRC
Страница 1: ...User Manual ...
