Setup
-6-
Vesuvio™ RGBA User Manual Rev. 1
3.
S
ETUP
AC Power
Each Vesuvio™ RGBA has a fixed power supply that works with an input voltage of
120 VAC, 60 Hz. To determine the power requirements for each Vesuvio™ RGBA, refer to the
label affixed to the product. You can also refer to the
Technical Specifications
chart in this
manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website
www.chauvetlighting.com/download/pro
.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Vesuvio™ RGBA comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug to the power input cord.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Resetting the
Breaker
This product is equipped with a resettable circuit breaker on the power input circuit.
If the breaker trips, all sections of this product will lose power. Refer to the following instructions
for resetting the breaker.
This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this
product will lose power.
1. Disconnect the product from power.
2. Allow the product to cool for 15 minutes.
3. After 15 minutes, try to reset the breaker by pressing the button until it latches in the
operation position.
4. Connect the product to power and continue using as recommended.
Disconnect this product from the power outlet before resetting the breaker.
If the breaker does not reset (the breaker will not remain in the ON position), contact
CHAUVET® immediately. This indicates a possible internal malfunction.
DMX Linking
You can link the Vesuvio™ RGBA to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX compatible products with the Vesuvio™ RGBA, you can control each
individually with a single DMX controller.
DMX
Personalities
The Vesuvio™ RGBA uses a 3- or 5-pin DMX data connection for its 9-channel DMX
personality.
•
Refer to the
Introduction
chapter for a brief description of each DMX personality.
•
Refer to the
Operation
chapter to learn how to configure the Vesuvio™ RGBA to work in
these personalities.
•
The
DMX Values
section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the CHAUVET® website:
www.chauvetlighting.com/download/pro
.
Содержание Green Thinking Professional Vesuvio RGBA
Страница 1: ...User Manual ...
