Chauvet Freedom Par RGBA, Руководство пользователя

Страница: 26 / 88

Page 26 of 88 Freedom™ Par RGBA and Strip Mini RGBA User Manual Rev. 4
D-Fi™ 2.4 GHz
(DMX Mode
Manual Sync)
The Freedom™ RGBA series offers wireless control of 2 or more products with a single
DMX controller. To manually set up the D-Fi™ syncing function for DMX functionality, do
the following:
For the transmitting product:
1. Press <MODE> repeatedly until SYS , ACt , ACtC , SLAv , or S-Ir shows on the
display.
2. Use <UP> or <DOWN> to select SYS .
3. Press <ENTER> .
4. Press <UP> or <DOWN> until S-tr shows on the display.
5. Press <ENTER> .
6. Press <UP> or <DOWN> until dt.CH shows on the display.
7. Press <ENTER> .
8. Use <UP> or <DOWN> to select the transmitting signal ( dt.01 – dt.16 ).
For the receiving product(s):
1. Press <MODE> repeatedly until SYS , ACt , ACtC , SLAv , or S-Ir shows on the
display.
2. Use <UP> or <DOWN> to select SYS .
3. Press <ENTER> .
4. Press <UP> or <DOWN> until S-tr shows on the display.
5. Press <ENTER> .
6. Press <UP> or <DOWN> until dr.CH shows on the display.
7. Press <ENTER> .
8. Use <UP> or <DOWN> to select the receiving signal ( dr.01 – dr.16 ). The channel
number should match the transmitting signal you chose in the prior steps.
Once the steps above are done, you can then back out to a more general menu level
and configure the transmitting product to operate it with a DMX controller.
To configure your product to work with DMX, refer to the Starting Address section of the
Operation section of this manual.
•
If you are experiencing antenna issues or need to improve signal quality,
extend the antenna outward away from the product and keep the line of sight
between products unobstructed.
•
Ensure that all linked products are configured to the same DMX personality
(either 4-channel or 5-channel).
•
To sync multiple transmitters in one room, manually set each receiver and the
designated transmitter to a specific frequency and then perform the syncing
steps.