Page 11 of 17
Operation
Freedom Flex H4 IP X6 User Manual Rev. 2
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Programs
To run the Freedom Flex H4 IP in automatic mode, follow the instructions below.
1.
Press
<MENU>
repeatedly until
P--
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select an automatic program, from
P 1–4
.
4.
Press
<ENTER>
.
Auto-Program Speed
To change the auto-program speed on the Freedom Flex H4 IP, do the following:
1.
Press
<MENU>
repeatedly until
S--
shows on the display.
2.
Use
<UP>
or
<DOWN>
to increase or decrease the program speed, from
S 1–100
.
3.
Press
<ENTER>
. The product will return to the last selected mode.
Preset Color Mode
To run the Freedom Flex H4 IP on a static color, follow the instructions below.
1.
Press
<MENU>
repeatedly until
C--
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select a static color, from
C 1–63
.
4.
Press
<ENTER>
.
Custom Color Mixing
To custom mix a static color, do the following:
1.
Press
<MENU>
repeatedly until
U--
shows on the display.
2.
Press
<ENTER>
. and one of the following will appear:
•
r_ _ _
(red)
•
g_ _ _
(green)
•
b_ _ _
(blue)
•
A_ _ _
(amber)
•
W_ _ _
(white)
•
P_ _ _
(UV)
3.
Press
<ENTER>
to cycle through the color settings.
4.
When the desired color shows on the display, use
<UP>
or
<DOWN>
to increase or decrease the
color value, from
0–255
.
5.
Repeat steps 3 and 4 until the product outputs as desired.
Configuration (Settings)
Dimmer Speed Mode
To change the dimmer speed on the Freedom Flex H4 IP, follow the instructions below.
1.
Press
<MENU>
repeatedly until
dIM
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select from
dIM1
(fast),
dIM2
(medium),
dIM3
(slow), or
OFF
.
4.
Press
<ENTER>
.
Passcode Mode
To lock the display of the Freedom Flex H4 IP, do the following:
1.
Press
<MENU>
repeatedly until
PASS
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
ON
(locks the display) or
OFF
(does not lock the display).
4.
Press
<ENTER>
.
When the display is locked, the passcode is
<UP>
,
<DOWN>
,
<UP>
,
<DOWN>
,
<ENTER>
.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Содержание FREEDOM FLEX H4 IP
Страница 1: ...User Manual...