Chauvet FREEDOM FLEX H4 IP, Руководство пользователя, Страница: 11 / 20

Page 8 of 17
Freedom Flex H4 IP X6 User Manual Rev. 2
Operation
Wireless DMX Linking
The Freedom Flex H4 IP works with a DMX controller in Wireless DMX mode. In wireless DMX mode a
lighting control board or D-Fi product must send wireless DMX signals to the products. Information about
DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://
www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf .
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The Freedom Flex H4 IP uses up to 12 DMX channels, which defines the highest configurable address as
501 .
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until 6-CH , 8-CH , or 12CH shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the starting address, from d 1–512 .
4. Press <ENTER> .
Wireless DMX Configuration
The Freedom Flex H4 IP offers wireless control of 2 or more products with a single DMX controller. To set
up the D-Fi 2.4 GHz transceiver, follow the instructions below.
For the transmitting product:
1. Press <MENU> repeatedly until S-tr shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select dtCH .
4. Press <ENTER> .
5. Use <UP> or <DOWN> to select the D-Fi channel, from dt 1–16 .
6. Press <ENTER> .
For the receiving product(s):
1. Press <MENU> repeatedly until S-tr shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select drCH .
4. Press <ENTER> .
5. Use <UP> or <DOWN> to select the D-Fi channel, from dr 1–16 . The channel number should
match the channel number of the transmitting product or controller.
6. Press <ENTER> .
Caution: D-Fi 2.4 GHz operation can be interrupted or inhibited by obstructions between
the transmitter and receiver such as structures or people. For best results, keep the line of
sight clear.
•
The Freedom Flex H4 IP is fully compatible with the D-Fi 2.4 GHz wireless transceiver
(transmitter/receiver) from Chauvet (sold separately). For more detailed information
about D-Fi 2.4 GHz functionality, refer to the D-Fi 2.4 GHz User Manual available at the
Chauvet website www.chauvetdj.com .
• Ensure that all linked products are configured to the same DMX personality.