EZpar™ 56 QRG
EN
4
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
For the maximum number of EZpar™ 56 products that you can power link at
each voltage, see the sticker on the product or the User Manual.
Fuse
Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
Charging the
Battery
The EZpar™ 56 comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the power cord at any time
before, during, or after operation. To charge the battery before or after operation
with all the LEDs off, leave the power switch in the Off postion. The red
indicator light for the battery turns on while the battery is charging. The green
indicator light turns on when the battery is done charging.
Battery Life
Indicator
The battery life indicator shows the remaining amount of internal battery life
when the the menu buttons are inactive.
100%
75%
50%
25%
Infrared Remote
Control (IRC)
The EZpar™ 56 is fully compatible with the IRC from CHAUVET®. For
more information on the IRC or to download instructions, go to
www.chauvetlighting.com
.
Содержание EZpar 56
Страница 1: ...Quick Reference Guide ...