EZMiN™ Laser FX/RBX User Manual Rev. 3
Page 11 of 48
3.
S
ETUP
AC Power
The EZMiN™ Laser FX/RBX has an external auto-ranging power supply and it can work
with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the
Technical Specifications
. The listed current rating indicates the product’s
average current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the
product has an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Charging the
Battery
The EZMiN™ Laser FX/RBX comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the power cord at any time before,
during, or after operation.
The EZMiN™ Laser FX/RBX battery should be charged 24 hours prior to initial use for
optimal battery life.
Battery
Runtime
The maximum runtime for the EZMiN™ Laser FX/RBX battery is up to 6 hours; however,
the operation mode used has a bearing on the final runtime for the battery. To achieve
the maximum battery runtime, set the product in the Sound-Active modes only. When
using the Automatic modes, the battery runtime may be shortened.
Battery
Maintenance
To keep the battery in optimal operating condition, store the product in a cool, dry place
and charge at least once every 30 days when not in use.
Avoid exposure to extreme temperatures. If the product is exposed to extreme cold or
hot temperatures, warm up/cool down the product before use and before charging.
