Chauvet DMX-7, Руководство пользователя

Страница: 9 / 17

Appendix
DMX-7 User Manual 9
2006-03-20/15:55
Programming
A chase bank is a sequence of different scenes (or steps) that will be called up one after another. In
the DMX-7 8 chases can be created of 60 scenes in each.
EN T ER I N G PR O G R AM M O D E
1) Press the Program button for 2 to 3 seconds to enter the program editor.
(You will notice that the Chase LCD display will begin to blink with a number 1)
C R E AT E/ E D I T A C H AS E O R ST E P
Scenes or in the case of the DMX-7
“ steps ” are stored in a chase bank. Each chase bank will hold up
to 60 steps.
Action

1) Press the Program button for 2 to 3
seconds to enter the program editor.
(You will notice that the Chase LCD display
will begin to blink with a number 1)
2) You are instantly placed on Chase [ 1 ] and
Steps [ 01 ].
3) Navigate Chase and Steps by using the
adjacent Up/Down arrow buttons to the right
of the LCD displays. Choose a location.
4) Select the Scanners to include in the step
then move the faders and joystick to
achieve a desired look.
5) Press the Program button to store. The
LEDs will blink twice to confirm.
6) Repeat steps 3 through 5 to add or likewise
edit steps.
7) Press the Blackout button to exit the
program editor.
Notes

Remember! Press the Page Select button to access
channels 7 ~ 12 on the faders.
Tip!
There are 3 joystick control speeds that make mirror
or yoke positioning of the scanners easier to manage.
Press the Fine button to change joystick speeds, the
“
Joystick speed LED
”
will indicate the speed;
LED Speed
=== ====
OFF Fastest speed
ON Medium speed
Blink Slowest speed
D E L ET E A ST E P
Action

7) Press the Program button for 2 to 3
seconds to enter the program editor.
(You will notice that the Chase LCD display
will begin to blink with a number 1)
8) You are instantly placed on Chase [ 1 ] and
Steps [ 01 ].
9) Navigate Chase and Steps by using the
adjacent Up/Down arrow buttons to the right
of the LCD displays. Locate the step to
delete.
10) Press the Manual Auto/Audio button to
delete the step. All LEDs will blink twice to
confirm.
Notes
