Chauvet DMX-7, Руководство пользователя

Страница: 16 / 17

Appendix
DMX-7 User Manual 16
2006-03-20/15:55
General Troubleshooting
Applies to
Symptom Solution(s)
Lights
Foggers
& Snow Controllers
Dimmers
& Chaser
Auto shut off Check fan thermal switch reset

Beam is very dim or not
bright Clean optical system or replace lamp
Check 220/110v switch for proper setting

Breaker/Fuse keeps
blowing Check total load placed on device

Chase is too slow Check users manual for speed adjustment
  
Device has no power Check for power on Mains.
Check device
’ s fuse. (internal and/or external)
  
Fixture is not
responding Check DMX Dip switch settings for correct addressing
Check DMX cables
Check polarity switch settings

Fixture is on but there
is no movement to the
audio Make sure you have the correct audio mode on the control
switches. If audio provided via
¼ ” jack, make sure a live
audio signal exists
Adjust sound sensitivity knob
  
Lamps cuts off
sporadically Possible bad lamp or fixture is overheating.
Lamp may be at end of its life.

Light will not come on
after power failure Some discharge lamps require a cooling off period before
the electronics in the fixture can kick start it again, wait 5 to
10 minutes before powering up

Loss of signal Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables or
black lights.
   
Moves slow Check 220/110v switch for proper setting

No flash Re-install bulb, may have shifted in shipping

No laser output Bounce mirror motor may have shifted during shipping,
readjust

No light output Check slip ring & brushes for contact
Install bulb
Call service technician

Relay will not work Check reset switch
Check cable connections

Remote does not work Make sure connector is firmly connected to device
 
Stand alone mode All Chauvet lighting fixtures featuring stand-alone functions
do not require additional settings, simply power the fixture
and it will automatically enter into this mode
