Chauvet D-Fi Stream 6, Руководство пользователя

Страница: 8 / 12

Page 8 of 12 D-Fi™ Stream 6 User Manual Rev. 1
4. O
PERATION
Configuration The D-Fi™ Stream 6 is configured with the DIP switches on the front just under the
antenna. The D-Fi™ Stream 6 can transmit D-Fi™ or receive D-Fi™. The
D-Fi™ channel can be selected manually or automatically. There is a DIP switch settings
table affixed to the top of the product, and the DIP switches and settings are described in
the following sections.
DIP Switches
The 6 DIP switches that configure the D-Fi™ Stream 6 are shown below:
•
DIP switches 1 thru 4 set the D-Fi™ channel, but DIP switch 5 must be in the ON
position for DIP switches 1 thru 4 to have any effect.
•
DIP switch 5 toggles between the D-Fi™ Channel Selection modes: Auto-Sync
(OFF) and Manual (ON).
•
DIP switch 6 toggles between Transmit D-Fi™ (ON) and Receive D-Fi™ (OFF).
•
The DIP switch settings shown in the example above configure the
D-Fi™ Stream 6 for D-Fi™ Receive mode, with Manual Channel Selection and a
D-Fi™ Channel of 9.
•
For a list of DIP switch combinations, see the DIP switch settings table on the
top of the D-Fi™ Stream 6.
D-Fi™ products must be using the same channel to communicate.
You can sync an unlimited amount of Receivers to one Transmitter.
To ensure strong D-Fi™ signals, the units should be elevated 5 feet or higher off
the ground and remain in an unobstructed line of sight of each other.
For the best results, add individual receivers using Manual mode to ensure you
can select the same channel for the additional products.
DIP Switch
Chart
Location
Configuration
Notes
Transmit D-Fi™ mode requires the following:
•
The D-Fi™ Stream 6 is connected to a lighting controller via a DMX cable.
•
The lights are D-Fi™-compatible and configured for the same channel as the D-Fi™
Stream 6.
•
There are no obstructions between the D-Fi™ Stream 6 and the lights.
Receive D-Fi™ mode requires the following:
•
The D-Fi™ Stream 6 is connected to the lights via a DMX cable.
•
The lighting controller is D-Fi™-compatible and configured for the same channel as
the D-Fi™ Stream 6.
•
There are no obstructions between the D-Fi™ Stream 6 and the lighting controller.
Set the D-Fi™
Channel
Auto-Sync Or Manual
Channel Selection
Receive Or
Transmit D-Fi™
Top View