EN
COLORdash™ Par-Tri 18VW QRG
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 15 COLORdash™ Par-Tri 18VW products at 120 VAC or
28 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdash™ Par-Tri 18VW will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com
.
DMX Connection
The COLORdash™ Par-Tri 18VW uses a regular DMX data connection for its
DMX personalities:
2 Ch
,
3 Ch
, and
7 Ch
. See the User Manual to connect and
configure for DMX operation.
Master/Slave
Connection
The COLORdash™ Par-Tri 18VW uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
