Chauvet COLORdash Par-Hex 12, Руководство пользователя, Страница: 19 / 25

Operation
COLORdash™ Par-Hex 12 User Manual Rev. 1 -15-
Dimming Modes
This setting provides three different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the
Dim Mode main level.
2. Select a dimmer curve ( OFF , DIM1 , DIM2 , or DIM3 ).
OFF: The output is proportional (linear) to the dimmer.
DIM 1–3: The output follows the dimmer based on the corresponding dimmer curve,
DIM 1 being the fastest and DIM 3 the slowest.
White Balance
This setting allows you to select the white color shown by the COLORdash™ Par-Hex 12 by
adjusting the red, green, and blue maximum values.
1. Go to the
White Balance main level.
2. Select a color R , G , or B .
3. Go to the Value programming level.
4. Select a color value ( 125–255 ).
5. Repeat for the other colors.
When adjusting the white balance, you will only be able to define the values of red,
green, and blue.
Backlight This setting allows you to set the amount of time the backlight on the COLORdash™ Par-Hex
12’s display stays on after the last button is pressed on the control panel.
1. Go to the
BackLite main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
Product
Temperature
This option shows the temperature (°C) of the COLORdash™ Par-Hex 12.
•
Go to the Temp main level.
Software
Information
This option shows what version of software the COLORdash™ Par-Hex 12 is running.
1. Go to the
Info main level.
2. Select Version and the version number will show on the display.
Fixture Hours
This option shows the total amount of hours the COLORdash™ Par-Hex 12 has been turned
on.
1. Go to the
Info main level.
2. Select FixHours and the total number of hours will show on the display.
LED Test
This option runs a check of the LEDs on the COLORdash™ Par-Hex 12 by turning on all the
LEDs in sequence.
1. Go to the
Info main level.
2. Go to the Auto programming level.
3. Go to the Test programming level.