
Setup
COLORdash™ Par-Hex 12 User Manual Rev. 1
-7-
Power Linking
The COLORdash™ Par-Hex 12 supports power linking. You can power link up to
17 products at 120 V; up to 27 at 208 V; or up to 30 at 230 V.
This product comes with a power input cord. Power linking cables are available from
CHAUVET® for purchase.
DMX Linking
You can link the COLORdash™ Par-Hex 12 to a DMX controller using a 3- or 5-pin DMX
connection. If using other DMX compatible products with the COLORdash™ Par-Hex 12,
you can control each individually with a single DMX controller.
DMX Personalities
The COLORdash™ Par-Hex 12 uses a 3- or 5-pin DMX data connection with its DMX
personalities.
•
Refer to the
Introduction
chapter for a brief description of each DMX personality.
•
Refer to the
Operation
chapter to learn how to configure the COLORdash™ Par-Hex
12 to work in these personalities.
•
The
DMX Values
section provides you with detailed information regarding the DMX
personalities.
Master/Slave
Connectivity
The Master/Slave mode allows a COLORdash™ Par-Hex 12 (the master) to control one
or more COLORdash™ Par-Hex 12s (the slaves) without a DMX controller. One
COLORdash™ Par-Hex 12 becomes the master when running an Auto or Custom
program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During
Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The
Operation
section of this manual provides detailed instructions on how to configure
the master and slaves.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the CHAUVET® website:
www.chauvetlighting.com/download/pro
.
Содержание COLORdash Par-Hex 12
Страница 1: ...User Manual...