COLORdash™ Block User Manual
19
6/19/2009 4:54 PM
Important Notes about STAGE 1 DMX Operation
Master Dimmer
Channel 1 controls the intensity of the currently projected color
When the slider is at the highest position (255), then the intensity of the output is at the
maximum.
Red, Green Blue and White Color Selection
Channels 2, 3, 4 and 5 control the intensity ratio of each of the Red, Green, Blue, & White
LEDs.
Channels 2, 3, 4 and 5 can be combined together to create over 42 billion color
combinations.
Strobe
Channel 7 controls the strobe of Channels 2 through 5.
Channel 7 has priority over Channels 2, 3, 4, & 5.
Speed of the strobe is adjustable from 0 ~ 20 Hz.
Color Macros
Channel 6 selects the required Color Macro.
Channel 6 has priority over Channels 2, 3, 4, & 5.
Channel 1 is used to control the intensity of the current Color Macro.
ID Address Selection
Use channel 10 to select the target ID address.
Each independent DMX address can have up to 66 ID addressed fixtures.
ID address 0 allows control of all fixtures simultaneously.
Auto & Custom Programs
Channel 8 selects the preset Auto/Custom programs 1~10
When activating the Auto/Custom programs, it is then possible to control the Step time and
Fade time by using Channels 2 & 3, respectively.
Contact Us
W o r l d W i d e
General Information
Chauvet Lighting
3000 North 29
th
Court
Hollywood, FL 33020
voice:
954.929.1115
fax:
954.929.5560
toll free:
800.762.1084
Technical Support
www.chauvetlighting.com
voice:
(954) 929-1115 - (Press 4)
fax:
(954) 929-5560 - (Attention: Service)
World Wide Web
www.chauvetlighting.com
