EN
2
COLORband PiX-M USB QRG Rev. 2
QUICK REFERENCE GUIDE
Product Description
The COLORband PiX-M USB is a moving LED strip light with individual pixel control for pixel mapping effects. Built-in
motors let you angle the light where needed. Built-in infrared technology offers easily controllable static colors and
automated programs with the optional IRC-6 remote. DMX control wirelessly with the convenient built in D-Fi USB port.
Ten high-power, tri-color LEDs nearly eliminate multicolored shadows and the smooth and even output makes it perfect
as a blinder or a wash light.
Overview
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of COLORband PiX-M USB products that you can power link at each voltage, see the User
Manual or the sticker on the product.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5.
Re-insert the fuse holder and reconnect power.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Infrared
Sensor
Power
In
Fuse
Holder
LED
Display
Microphone
Power
Out
DMX
In/Out
Menu
Buttons
D-Fi USB
Port
Содержание COLORBAND PIX-M USB
Страница 1: ...Quick Reference Guide...