Chauvet COLORado PXL Bar 16, Руководство пользователя

Страница: 12 / 44

Page 8 of 40
Operation
COLORado PXL Bar 16 User Manual Rev. 1
Dual Control
In Dual Control mode, the COLORado PXL Bar 16 is controlled by two protocol inputs: one controls the
movement, zoom, dimmers, and shutters, whereas the other one controls the individual LED output.
Dual Control Movement
The Movement protocol controls the movement of the bar and zoom, and the dimmers and shutters. Choose
from DMX, Art-Net™, or sACN. In this mode, the three personalities available are: Basic (8 channels),
Standard (20 channels), Advanced (26 channels), and Basic2 (7 channels).
Dual control movement protocol
To select the Dual Control Movement protocol, follow the instructions below:
1. Go to the Address main level.
2. Select Dual Control .
3. Select Movement .
4. Choose from the following: DMX , ArtNet , or sACN .
Dual control movement personality
To select the Dual Control Movement personality, do the following:
1. Set the protocol .
2. Select Personality .
3. Choose from the following: Basic (8 channels), Standard (20 channels), Advanced (26 channels), or
Basic2 (7 channels).
Dual control movement start address
To set the starting address of the Dual Control Movement mode, follow the instructions below:
1. Set the protocol .
2. Select Start Address .
3. Set the desired starting address, from 0 to 512 .
Dual control movement universe
To set the universe address of the Dual Control Movement mode when using Art-Net™ or sACN, do the following:
1. Set the protocol .
2. Select Universe .
3. Set the desired universe address, from 0 to 255 .
Dual Control Pixels
The Pixels protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN, or Kling-
Net. In this mode, the three personalities available are: Basic (48 channels), Standard (64 channels), and
Advanced (128 channels).
Dual control pixels protocol
To select the Dual Control Pixels protocol, follow the instructions below:
1. Go to the Address main level.
2. Select Dual Control .
3. Select Pixels .
4. Choose from the following: DMX , ArtNet , sACN , or Kling-Net .
Dual control pixels personality
To select the Dual Control Pixels personality, do the following:
1. Set the protocol .
2. Select Personality .
3. Choose from the following: Basic (48 channels), Standard (64 channels), or Advanced (128 channels).
Dual control movement start address
To set the starting address of the Dual Control Pixels mode, follow the instructions below:
1. Set the protocol .
2. Select Start Address .
3. Set the desired starting address, from 0 to 512 .
Dual control movement universe
To set the universe address of the Dual Control Pixels mode when using Art-Net™ or sACN, do the following:
1. Set the protocol .
2. Select Universe .
3. Set the desired universe address, from 0 to 255 .