Chauvet Circus, Руководство пользователя

Страница: 9 / 20

4. Operating Instructions
9 1/17/2011 6:15 PM
4. O
PERATING
I
NSTRUCTIONS
Using the Control Panel
Access control panel functions using the four buttons located directly underneath the LED display.
B
UTTON
F
UNCTION
<MODE>
Used to scroll through the
current operating mode, as well
as back out of the current menu
option
<DOWN>
Used to select a decreasing
value
<UP>
Used to select an increasing
value
<ENTER>
Used to activate a selection and
store it to memory
Menu Map
M
ENU
P
ROGRAMMING
S
TEPS
Description
DMX address d.001~512 Select the starting address
Standalone: slave SLAu Slave operating mode
Standalone: sound SOUn Sound active standalone mode
Microphone sensitivity SE.00~31
Microphone sensitivity (sound active mode
only)
Standalone:
static
C.L.r- Red
C.L.g- Green
C.L.b- Blue
C.L.y- Amber
C.L.u- White
Software version v-#.# Displays the software version installed
Standalone:
auto-selection
Pr.01~42
Operate in standalone mode with preset run
speeds
Standalone:
auto-configure
AUTO
n000~100 Program progression time (slow~fast)
SP00~99, FL Run speed (slow~fast)
FS00~99 Strobe rate (off, slow~fast)
Configuring the Starting Address
The Circus™ fixture uses three DMX channels. In this DMX configuration/personality, the highest
configurable address is 510 . Any address higher than this will prevent access to all of the
channels while in this mode; however, if you desire to use one of the other DMX configurations
(personalities), please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommend reading the “DMX Primer” section in the
“Appendix”.