manualshive.com logo in svg

Chauvet Professional ROGUE, Руководство пользователя, Страница: 6 / 34

Поделиться
Скачать
Chauvet Professional ROGUE Скачать руководство пользователя страница 6

Page 4 of 32

 B

EFORE

 Y

OU

 B

EGIN

Rogue Outcast 1 Hybrid User Manual Rev. 2

Safety Notes

Read all the following safety notes before working with this product. These notes contain important 

information about the installation, usage, and maintenance of this product.

Personal Safety

•

Avoid direct eye exposure to the light source while the product is on.

•

Always disconnect the product from the power source before cleaning or replacing the fuse.

•

Always connect the product to a grounded circuit to avoid the risk of electrocution.

•

Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

•

The product is intended for professional use only.

•

This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to 

rain or moisture. (IP20)

•

CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to 

warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid 

causing a failure, allow product to fully acclimate to the surrounding environment before connecting 

it to power.

•

Always ask for help when mounting this product to avoid personal injuries or damage to the product

•

Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

•

Make sure there are no flammable materials close to the product when operating.

•

When hanging this product, always secure to a fastening device using a safety cable.

•

The product should be positioned so that prolonged staring into the luminaire at a distance closer 

than 2.3 m is not expected.

Power and Wiring

•

Always make sure you are connecting the product to the proper voltage in accordance with the 

specifications in this manual or on the product’s specification label.

•

Never connect the product to a dimmer pack or rheostat.

•

Never disconnect this product by pulling or tugging on the power cable.

•

If the external flexible cable or cord of this product is damaged, it shall be replaced with a special 

cable or cord exclusively available from the manufacturer or its service agent.

Operation

•

Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged 

parts replaced by an authorized technician at once.

•

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely 

disconnect the product from power via breaker or by unplugging it.

•

Do not cover the ventilation slots when operating to avoid internal overheating.

•

Do not aim this product toward the sun. The lenses could concentrate the solar energy and cause internal 

overheating.

•

The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

•

In the event of a serious operation problem, stop using this product immediately!

This product contains no user-serviceable parts. Any reference to servicing in 

this User Manual will only apply to properly trained, certified technicians. Do not 

open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this 

product.

If your Chauvet product requires service, contact Chauvet Technical Support. 

!

Содержание ROGUE



































Отзывы:

Нет отзывов