Page 10 of 32
O
PERATION
Rogue Outcast 1 Hybrid User Manual Rev. 2
4. Operation
Control Panel Operation
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press
<MENU>
repeatedly until the option shows on the display.
Press
<ENTER>
to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press
<UP>
or
<DOWN>
until
the option shows on the display. Press
<ENTER>
to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press
<MENU>
repeatedly to exit to the previous main level.
Control Panel Lock
This setting enables you to activate or disable the control panel lock, which keeps unauthorized users from
changing the product’s settings.
1.
Go to the
Key Lock
main level.
2.
Select
ON
or
OFF
.
Configuration (DMX)
Use control configurations to operate the product with a DMX controller. For information on how to
configure wireless DMX, see
.
Control Personalities
This setting allows you to choose a particular control personality.
1. Go to the
Running Mode
main level, then the
DMX
sublevel.
2. Select the desired personality (
20CH
or
25CH
).
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1. Starting from the Main Level screen, select
Address,
press
<ENTER>.
2. Select the starting address
(001–512)
, press
<ENTER>.
The highest recommended starting address for each DMX mode is as follows:
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the
current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a
function
<DOWN>
Navigates downward through the menu list or decreases the numeric value when in a
function
The product will prompt for a passcode to access the product’s main
programming level when the control panel lock is activated. Enter the following
passcode: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
•
section for the highest starting address you can select for
each personality.
•
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
Personality
Address
20CH
493
25CH
487
Содержание ROGUE
Страница 1: ...USER MANUAL ...