3
EN
QUICK REFERENCE GUIDE
Ovation H-55WW QRG Rev. 7
Wireless Operation
In optimal conditions, the Ovation H-55WW can operate up to 300 m (900 ft) away from the W-DMX transmitter. The
W-DMX receiver in the Ovation H-55WW must be paired with the W-DMX transmitter for wireless operation.
Initial Setup
1.
Turn the W-DMX transmitter on.
2.
Connect the W-DMX transmitter to a DMX controller.
3.
Place the Ovation H-55WW within 300 m from the W-DMX transmitter.
4.
Disconnect any DMX cable from the Ovation H-55WW.
5.
Turn the Ovation H-55WW on.
Wireless Configuration
To configure the wireless mode, press and hold the button next to the indicator lights.
Mounting
Before mounting this product, read the
. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Product Mounting Diagram
Mode
Wireless Indicator Light
Description
OFF
Green/Red lights off
Fixture is off
RECEIVE MODE
Green light flashing slowly
In Receiving Mode
Red light off
Waiting for wireless connection
Red light on
Connected with W-DMX Control and there is a DMX input signal
Red light flashing slowly
Connected with W-DMX Control but no DMX input signal detected
Red light flashing quickly
Connected to W-DMX Control but the signal is weak
W-DMX operation can be interrupted or inhibited by liquid masses between the transmitter and
receiver such as water, snow, or people. For best results, keep the area between the transmitter
and receiver clear of any liquid mass.
!
Mounting Clamp
Overhead Mounting
Pendent Mounting
Side/Wall Mounting
Scone kit