
Page 45 of 271
Operation
Maverick MK2 Wash User Manual Rev. 10
Backlight timer
To set the amount of time after inactivity before the display backlight turns off:
1. Navigate to the
menu.
2. Use
<UP>
or
<DOWN>
to select
Backlight Timer
, or touch the display where it says
Backlight
Timer
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
30S
(after 30 seconds of inactivity),
1M
(after 1 minute of inactivity),
5M
(after 5 minutes of inactivity), or
ON
(does not turn off), or touch
the display where it says the desired option.
5. Press
<ENTER>.
Loss of data
In case of an input signal being lost in any way, the Maverick MK2 Wash will respond in one of two ways.
the product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1. Navigate to the
menu.
2. Use
<UP>
or
<DOWN>
to select
Loss of Data
, or touch the display where it says
Loss of Data
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Hold
(hold last signal received) or
Close
(black out all LED output), or touch the display where it says the desired option.
5. Press
<ENTER>
.
Fan speed
To set the speed of the fans, do the following:
1. Navigate to the
menu.
2. Use
<UP>
or
<DOWN>
to select
Fans
, or touch the display where it says
Fans
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Auto
(fan speed set according to product
temperature),
Full
(maximum speed), or
ECO
(quiet fans mode), or touch the display where it says
the desired option.
5. Press
<ENTER>
.
Color mixing mode
The Maverick MK2 Wash has a mode that emulates CMY (cyan, magenta, and yellow) color mixing. In this
mode, the dimming is reversed (000=100%, 255=0%), and the red, green, and blue channels control cyan,
magenta, and yellow, respectively.
To set the color mixing mode:
1. Navigate to the
menu.
2. Use
<UP>
or
<DOWN>
to select
C Mixing Mode
, or touch the display where it says
C Mixing Mode
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
RGBW
(additive mode: red, green, blue,
and white), or
CMY
(subtractive mode: red controls cyan, green controls magenta, blue controls
yellow), or touch the display where it says the desired option.
5. Press
<ENTER>
.
Dimmer curve
To set the dimmer curve, follow the instructions below:
1. Navigate to the
menu.
2. Use
<UP>
or
<DOWN>
to select
Dimmer Curve
, or touch the display where it says
Dimmer
Curve
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
,
<DOWN>
,
<LEFT>,
or
<RIGHT>
to select
Linear
,
Square
,
I Squa
, or
SCurve
, or
touch the display where it says the desired option.
5. Press
<ENTER>
.