Chauvet Professional F4XIP, Руководство пользователя

Страница: 16 / 41

12
Mounting
F4XIP User Manual Rev. 1
Mounting with Dual Function Rig Bar (Stacking)
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Close the latches of the male speego connections on the F-series panel.
3. To detach the Rig Bar from the F-Series panel, reverse the previous steps.
Removing the Feet
To remove the feet (alignment bolts) from the F4XIP, twist them counter-clockwise with a 5 mm wrench
until they come loose.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release panel until the hanging hardware has been fully secured.
Removing the feet may result in damage not covered by the warranty.
Alignment
Conical (x2)
Male Speego
Connection
Female Speego
Connection
(For use with
DRB Curve Kit or
Ground Support 2 Kit)
Back View
Top View
Alignment
Bolt (x4)
Alignment
Holes (x4)
Female Speego
Connection
Back View Side View
5 mm