Page 10 of 31
Operation
ÉPIX Drive 2000 IP User Manual Rev. 2
Ethernet Configuration
The ÉPIX Drive 2000 IP operates by routing one of three Ethernet protocols (Art-Net™, sACN, or Kling-
Net) to the ÉPIX IP and ÉPIX Tour products linked to the outputs of the Drive. The Ethernet protocol must
be set for the products to respond correctly to the controller. See the
Menu Map
for more information on
menu options.
Protocol
To configure the protocol for each port of the ÉPIX Drive 2000 IP, follow the instructions below:
1.
Press
<LEFT>
repeatedly until
Protocol
is selected.
2.
Press
<RIGHT>
.
3.
Use
<UP>
or
<DOWN>
to select from
Port A
or
Port B
.
4.
Press
<RIGHT>
.
5.
Use
<UP>
or
<DOWN>
to select from
Art-Net
,
Kling-Net
, or
sACN
.
6.
Press
<RIGHT>
.
Port Settings
To access the Art-Net™ or sACN settings for Port A or Port B, do the following:
1.
Press
<LEFT
repeatedly until
Port A
or
Port B
is selected.
2.
Press
<RIGHT
.
Control Personality
The ÉPIX Drive 2000 IP uses Art-Net™ or sACN for its 7 control personalities:
To select the control personality for either port, follow the instructions below:
1.
Navigate to the
Settings
for the desired port.
2.
Use
<UP>
or
<DOWN>
to select
Personality
.
3.
Press
<RIGHT>
.
4.
Use
<UP>
or
<DOWN>
to select from
Pixel
,
7-CH-Drive
,
8-CH-fixture
,
5-Section
,
10-Section
,
25-Section
, or
50-Section
.
5.
Press
<RIGHT>
.
Port B
(Art-Net™ and
sACN only)
Personality
Pixel
Sets control personality for Port A (see
Control Personality
)
7-CH-Drive
8-CH-fixture
5-Section
10-Section
25-Section
50-Section
Universe
000–246
(Art-Net™)
001–247
(sACN)
Sets the lowest of the 6 consecutive
universes to which Port A is assigned
IP Address
IP Address #1–
IP Address #10
1–126 . 0–255 .
0–255 . 0–255
Sets the IP addresses for Port A
Note: All IP addresses must be unique
DMX Address
001–_ _ _
Sets the starting address for Port A
(highest channel set by Personality)
Screen Lock
No
Locks screen. Passcode: UP, DOWN,
UP, DOWN, RIGHT
Yes
Software
Version
Port A:– – – – – – – -V _._ _
Port B:– – – – – – – -V _._ _
Displays the current software version
Personality
Channels
Description
Pixel
300 per ÉPIX Strip IP
Complete pixel control
7-CH-Drive
7
Dimmer, auto programs, and strobe
8-CH-fixture
8 per product
Dimmer, auto programs, strobe, and dimmer speed
5-Section
15 per ÉPIX Strip IP
Controls LED output in 5 groups of 20 LEDs
10-Section
30 per ÉPIX Strip IP
Controls LED output in 10 groups of 10 LEDs
25-Section
75 per ÉPIX Strip IP
Controls LED output in 25 groups of 4 LEDs
50-Section
150 per ÉPIX Strip IP
Controls LED output in 50 groups of 2 LEDs
Main Level
Programming Levels
Description
Содержание EPIX DRIVE 2000 IP
Страница 1: ...User Manual ...