KIT, SINGLE FAN, CUBE-IT
Page 2 of 2
Installation Instructions
Assembly Sequence
1. Connect Power Cord connector to Fan connecter. Attach green
ground wire loop to fan body using M4 screw.
2. It is recommended to mount the single fan on the hinge side of the
cabinet, in the lower vent pattern. Using the included screws, attach
Fan and Mounting Plate to the cabinet as shown. See image below for
correct Mounting Plate orientation. Fan should be inside the cabinet
with the Mounting Plate between the fan and cabinet.
3. From outside the cabinet, snap the Plastic Retainer to the Mounting
Plate, capturing the Filter media.
4. Attach the Blanking Panel to the vent pattern on the opposite side of
the cabinet.
5. Plug Power Cord into approved power supply to power fan. Fan will
run when powered.
Step 1
Step 4
Step 2
Step 3
