Chassis Plans
CPR-30201 Technical Reference
Page
5
Connecting the Display
The CPR-30201 provides for analog, digital, composite and S-Video video inputs as well as connections for the
keyboard and mouse, and audio input and output. The CPR-30201 with KVM provides connectors mounted to the
rear of the system and includes 72” cables that connect to the user equipment. Optional cable lengths, connectors,
markings, etc. are available on special order.
Legend Function
Connector
Audio L / Audio R
Audio Inputs for CVS and S-Video
RCA Plugs
CVI
Composite Video Input (CVS)
Recessed BNC.
S-Video
S-Video Input
4-Pin Mini Din
CPU1-4
aRGB Inputs to KVM plus Audio In/Out
Custom HD15 w/ 3.5mm Female Mini Stereo
Jacks
(See Note 1 Below)
aRGB Console
KVM Output – Loop Back to Display
HD15 w/ 3.5mm Female Mini Stereo Jacks
(See Note 2 Below)
F/W Upgrade
KVM Firm Ware Upgrade
RJ45 (See Note 3 Below)
USB
USB Output
USB Connector – Type A
(See Note 4 Below)
DVI-D
DVI-D Video Input
DVI-D Connector
15VDC
Power Input, 15VDC
2-Pin 2x5.5mm Power Plug Receptacle
Not Marked
aRGB Video and Sound Input to Display
from KVM
HD15 and 3.5mm Male Mini Stereo Plug
Video and Audio Connections
Note 1 – The CPR-30201 with KVM provides for connecting to four separate computers using the included
cables. Plug the
Gold
end of the cable with the Green and Red Audio Connectors into the
appropriate CPU1 through CPU4 connector on the rear of the CPR-30201. The computer end of
the cable provides a Blue HD15 connector for video, a Type A USB connector for the
trackball/touch pad (mouse input) and Red and Green audio connectors. The CPR-30201 does
not provide a microphone but provision is made on the rear of the display for a user provided
microphone to be connected to the Red Audio Connector in the aRGB Console area.
Note 2 – The output from the KVM is available at the aRGB Console connectors, outlined in Gold paint.
The two cables protruding from the right on the rear panel provide aRGB Video Input and Audio
Input to the display. These cables should be connected to the appropriate connectors in the
aRGB Console area.
Note 3 – The KVM provides for a Firm Ware upgrade using a special serial cable provided with the
display. Please see the appropriate area of the KVM section of this manual for instructions.
Leave the small switch in the Normal (right) position for operation.
Note 4 – The KVM provides two USB ports on the rear of the display. These USB ports are connected to
the selected CPU (1-4) when connected via the KVM. These USB ports can be connected by
the user to any USB compatible device.
