Chassis Plans
CPPM-8U201 Technical Reference
Page 6
Picture-In-Picture (PIP)
The CPPM-8U201 with the ‘V’ controller supports PIP. The PIP window can be sized to Small (approx 1.4x2.0”),
Medium (2.9x4.0”) or Large (4.3x5.6”). There are 5 preset PIP window positions or the window can be moved to a
user selected position through the OSD menus. The PIP window is used to put a smaller video feed window on top
of a full computer display. The
PIP
button on the front panel can be used to select the video feed to display and the
size.
The PIP source can only be S-Video or Composite input on top of either aRGB or DVI-D. The display will not use
either the aRGB or DVI-D as a PIP source. Setting the primary input to either Composite or S-Video disables the
PIP function.
The PIP window turns off when the monitor enters sleep mode, is turned off with the front Power control or is
stowed flat into the rack. To re-establish the PIP window, press the PIP button on the front panel and select the
desired input source and size using the + or – buttons.
Note
The default PIP source is TV. Whenever PIP is disabled by turning off the monitor or entering sleep
mode, the PIP input source will revert back to TV. After pressing
PIP
on the front panel, push either the
▲
or
▼
buttons to change to the PIP input selection Quick Menu and then
+
or
─
to change to the
desired input source.
