Chassis Plans CCIR-17, Техническое описание

Страница: 37 / 62

Chassis Plans CCIR -17 Technical Reference Chapter 7 – LCD Operation & OSDs
Page 35
OSD Menus
Select input source
Input source 1 Select input source to Analog RGB
Input source 2 Select input source to DVI
Auto Source Seek ON – Auto source select always enable
OFF – Disable auto source select function
Wide screen mode
information display* Select the input mode (1280 / 1360 / 1366 / 1368) to recognize and display the
correct input signal information display on the OSD menu.
1280 : 1280x768
1360 : 1360x768
1366 :1366x768
1368 : 1368x768
Exit Exit the OSD menu and save the settings
Brightness and Contrast
Brightness Increase/decrease brightness level.
Press – or + (- + ) Total : 256 steps
Contrast Increase/decrease panel contrast level.
Press – or + (- + ) Total : 192 steps
Exit Exit the OSD menu and save the settings
Color
Auto RGB Calibration*
Yes No ( Auto Color Calibration [See appendix IV])
Color Temperature  (Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
Adjust red color level
Press – or + (- +) Total :128 steps
Adjust green color level
Press – or + (- +) Total : 128 steps
Adjust blue color level
Press – or + (- +) Total : 128 steps
Press SEL UP/DN button to select item
Set the color temperature to 4200K
Set the color temperature to 5000K
Set the color temperature to 6500K
Set the color temperature to 7500K
Set the color temperature to 9300K
Gamma adjustment
 Adjust Gamma settings (0.4 / 0.6 / 1.0 / 1.6 / 2.2)
Select Gamma to 0.4
Select Gamma to 0.6
Select Gamma to 1.0
Select Gamma to 1.6
Select Gamma to 2.2
Exit Exit the OSD menu and save the settings
Table 10 - LCD Controller OSD Menus (cont)