Charnwood TH160-01, Инструкция по эксплуатации

Страница: 3 / 9

PREPARATION
Before assembly check that you have the 11 flat parts as illustrated below.
It is recommended that you have a flat non-marking surface to work on when assembling the
firepit. You will need a small pair of pliers to aid you in folding the joining tabs and a small hammer
may also be useful when flattening the tabs. Wearing a pair of work gloves is recommended to
avoid injury.
ASSEMBLING THE BALL
1. Select the 5 parts as shown below.
Although each of the above parts have the same outline, they do not all have the same cut
features. It is therefore very important that these parts are folded correctly to allow correct
assembly of the product.
2. Take part TH160~01 and fold all the narrow tabs up at an angle of 90° and all the wide tabs
up at an angle of 140°. Please note that these angles are only approximate.
3. Fold up in two steps as shown below and lock together in two places using the tabs. Please
note the orientation of the logo.
TH160~01
TH160~06 TH160~06 TH160~06 TH160~06 TH160~07 TH160~05
TH160~03 TH160~02 TH160~04 TH160~03
TH160~01 TH160~02 TH160~03 TH160~04 TH160~03
Note the different cut features
90°
140°
Note the orientation of the logo
Step 1 (3 folds) Step 2 (2 folds)
Bend the tabs fully over to
lock in position
Completed segment:
5
4