Charnwood Country 12WB MkII, Руководство по эксплуатации и установке

Страница: 10 / 16

Page 10
Country 6 8 12 9.02
optional multi-fuel grate has been
fitted, check that it operates correctly.
On completion of the installation and
after allowing a suitable period of time
for the fire cement and mortar to dry
out, make a layer of ash or sand on the
base of the stove before lighting it and
checking to ensure that smoke and
fumes are taken from the appliance up
the chimney and emitted safely. Also
check all joints and seals. On
completion of the installation and
commissioning please leave the
operating instructions with the
customer and advise them on the use
of the appliance.
C O M M I S S I O N I N G
optional vertical rear flue connector
does allow the chimney to be swept
through the stove, except when a
boiler is fitted.
Soot doors may either be in the actual
brickwork of the chimney or in the
register plate. Various positions of soot
doors are shown in Figs. 5 to 8.
Ensure that the throat plate is fitted in
the roof of the appliance except in the
case of a Country 6 with a boiler in
which case the throat plate is not
required. The location and positioning
of the throat plate is shown in Fig.3.
Before initial lighting check that the
front fence is fitted correctly and that
the doors tighten properly. If the
P R E L I G H T I N G
C H E C K
Fig. 9. Flue Blanking Plate.
Blanking Plate
Blanking Plate
Clamping Plate
with fold horizontal
Back of the Stove
Clamping plate finishes
flush with inside face of
firebox top and bottom.
with fire cement
Seal Blanking Plate