Charnwood BD15, Руководство пользователя

Страница: 8 / 15

Using The Sander
This sander is designed for use
with wood and wood-based
products only. It should not be
used for sanding metal and any
such use will invalidate the
warranty.
Dust extraction must be used at all
times.
Before use make sure your sander is
bolted down securely using the two
bolt holes.
The work table must always be used
as a support when carrying out
straight edge or face sanding.
Move the workpiece across the belt
while keeping one edge against the
work table.
Do not use excessive pressure and
take extra care when sanding thin
material.
To sand at an angle adjust the table
using the locking handle to the
required angle.
The top of the belt can be used for
internal curved sanding.
Loosen the locking knob and remove
the belt guard.