Charnwood BD15, Руководство пользователя

Страница: 6 / 15

Lock the table into position using the
locking handle and washer.
Tip: Hold the nut insert on the left in
place to stop it falling out then use the
ratchet on the locking handle to
tighten.
Using a set square ensure that the
table is set at 90 degrees to the
sanding belt.
Setting Up
Tracking the Belt
Ensure the machine is disconnected from
the power supply.
Loosen the knob and remove the belt
guard.
Slowly rotate the belt by hand by turning
the sanding disc, ensuring that it is
travelling in the direction of the arrow.
Note: if the belt is tending to slide off the
roller and to which side.
If the belt doesn’t slide sideways then it is
already tracked correctly.