Charnwood 1624V, Руководство пользователя

Страница: 14 / 20

Routine Maintenance
Remove Cover Plate Unscrew Knob
Loosen Grub Screws
Replacing the Drive Belt
Eventually, the drive belt will become
worn and require replacement.
To replace the belt, open the belt/pulley
access cover.
Remove the hand wheel from the spindle
by loosening the two grub screws and
then unscrewing it from the spindle.
Using a cross head screwdriver, remove
the cover plate surrounding the spindle
to allow access for the belt
Release the tension on the drive belt, as
when changing the speed range, and
remove the old belt by feeding it over the
end of the motor shaft, then over end of
the spindle and through the aperture in
the headstock casting.
Fit the new belt by reversing this
procedure. Apply tension and tighten the
locking handle. Ensure that the V-
grooves are on the inside of the belt and
engaged with the grooves on the pulleys.