10
PIC6-3
(1)
Component number:
on the left-side up corner (start from No.0). Press it you
can select the component number.
(2)
Comp. ID:
unique number
, it won’t have 2 same comp. ID in one work file.
M Stack:
stack
1-30, 31-60
is normal feeder on the two sides of machine, stack
81-91
is for front bulk IC, stack
92-100
is for vibration feeder, stack
101-119
is for
IC tray.
(3)
Speed:
0 is default value, it stands for max speed(100).
(For placing IC, you can
lower down the speed to 20-50, it will be more accuracy.
(4)
Height:
it is used for component height setting. 0.5 is default value, for under
3mm height component. More smaller value, means the component height will
more lower, means the Z axis goes more down. For higher component, you need
to set higher value.
(Note: machine general height is 0.5mm
,
the general PCB
thickness is 1.6mm, you can adjust the height according to the thickness
of your PCB
)
(5)
Angle:
for rotate angle of component.
(6)
Designator:
component identification information, such as R1, R2, C1, U1 etc.
(7)
Comments:
component information, such as 0402, 0805 etc.
(8)
M Head:
nozzle for this component
(9)
Coordinate X:
usually work file generated from software no need to change the
