22
8.
Set
PIC8-1
(16)
Detect Vacuum:
usually it keeps turn off, because you are enable "visual
component detect" already, then this function is useless. This function means
machine will detection of pick failure, and go pick again.
(1)
Visual assist:
enable it camera vision system will working
(2)
Visual comp detect:
if you turn on this function, system will pick again when it
detects lack of materials. If detect many lack of material many times, machine will
alarm and stop working.
(3)
Z Axis detect:
if you turn on this function, if Z axis lose step when mounting, Z
axis will back to origin automatically. Turn on this function will help to prevent Z
axis due to incorrect setting of component height.
(4)
Auto Calib. PCB:
if you turn on this function, machine will doing PCB calibrate
automatically by down-looking camera before running.
(5)
Run speed:
it stands for the whole speed of this machine.
(6)
System set:
setting up the system advanced parameter, need to enter code
“123456”
, if machine work fine, then no need to amend the setting.
(7)
Date time set
(8)
Clear statistic log
