Refrigerator Instruction
1.
Correct Positioning
Power Supply
•
The refrigerator is only applied with power supply of single phase alternating current .
•
If fluctuation of voltage in the district user is of so large that the voltage exceeds the scope,
for safety sake, be sure to apply A.C. automatic voltage regulator to the refrigerator. The
refrigerator must employ a special power socket instead of common one other electric
appliances. Its plug must match the socket with ground wire.
Power Line Cord
•
The cord should be neither lengthened nor folded into coil during operation. Moreover, it is
forbidden that cord is kept close onto the compressor at the back of the refrigerator, the
surface temperature of which is quite high when operating. Touching with it would deactivate
the insulation or cause leakage for electricity.
•
Extension cord is not recommended to use.
WARNING
If the power cord is damaged ,it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
The appliance must be positioned so that the plug is accessible.
Protection from Moisture
•
To minimize the possibility of getting rusty metal parts, do not place the refrigerator where
heavy moisture is present. Do not spray liquid directly to the refrigerator. Otherwise, poor
insulation and current leakage would occur.
Fixing Stable
•
Floor on which refrigerator will be placed must be flat and solid. It should not be laid on any
soft material such as foam plastic, etc. If the refrigerator is not on the same level, adjust the
screws suitably. The refrigerator should not be placed near anything which may echo.
25
Figure 83
CSA INTERNATIONAL
Project 2056658
26 of 45