19
Main& side burner lighting illustration
Rear burner lighting illustration
1.
Make sure the lid is open. 1
. Push and turn the Rear Burner
knob to
IGNITE/ON position and hold in for 3-4
seconds while continue to hold, push
electronic ignition button, until burner is lit.
Once it is lit, release electronic ignition
button, and still hold in the Rear Burner knob
for another 15 seconds to be sure the burner
stays lit.
2. Push and turn one of main or side
burner knob slowly to IGNITE/HI position.
3.
You may try 3 or 4 times to light the burner.
After the burner is lit, adjust the knob as desired
.
TO MATCH LIGHT THE GRILL:
If the burner will not light after several attempts then the burner can
be match lit.
If you’ve just attempted to light the burner with the igniter, allow 5
minutes for any accumulated gas to dissipate. Keep your face and
hands as far away from the grill as possible. Insert a lit extended
match or lighter through the cooking grids to the burner. Press the
control knob and rotate left to the IGNITE/HI setting, continue to
press the knob until the burner ignites. Burner should light
immediately. If the burner does not light in 4 seconds turn the knob
off, wait 5 minutes and try again.
The same process for using match light the side burner and rotisserie
burner.
2 2. The Rear Burner is lit, adjust the knob as desired.
LIGHTING ILLUSTRATIONS
