11
Side burner valve assembly:
Step 1: Insert valve assembly through side Step 2: Remove 4(four)screws & washer from the “U”
panel.
. brackets on the side burner.
Step 3: Insert valve stem assembly into burner Step 4: Insert valve stem assembly into control panel.
venturi.
Step 5: Replace ”U” brackets with 4(four) Step 6: Align & tighten knob bezel & valve stem with
Screws (DO NOT TIGHTEN) 2(two) screws & washers as shown below.
Step 7: Tight all 4(four)screws on the “U” brackets Step 8: Place knob on valve stem and secure with wrench.
on the burner, then connect the ignition
wire on to valve.
(Side panel, right)
(Control Panel )
Valve
(Wrench tool enclosed in bag )