4
Wick Replacement
Note:
When replacing the wick it is recommended that
you wear gloves and change it in an outdoor area.
1. Loosen the 3 dome
head nuts of the
guard and remove.
2. Loosen the 4 wing
nuts of the burner
unit and remove.
3. Pull the knob away
from the heater, and
then undo the nut
behind the control
button.
4. Pull the control
system out of the
appliance.
5. Remove the wick and
replace it with a wick
of the same type and
size. Make sure that
the new wick is in the
same position as the
old one.
6. Place the wick in the
heater and position
the control system.
The end of the control
button must again fit
in the slot.
7. Tighten the control system nut and push the knob
back in place.
8. Replace the burner unit and tighten the 4 wing nuts.
9. Replace the guard and tighten the 3 dome nuts.
Your Kerosene Heater is now ready for use again.
CHARMATE
CHARMATENZ
@CHARMATENATION
For any queries or assistance call
Customer Service
(Australia Only)
1300 174 876
Hours of operation:
Monday to Friday 8am - 5pm EST
Do not return to place of purchase.
Keep your purchase receipt, this will be required to
make any claims under the 12 month warranty.
