6
OPERATION
This appliance can be operated by both remote control and manual buttons. Once the unit has
been properly connected to an earthed electrical outlet turn on the main switch. A beep should
be heard when the power is first applied.
NOTES:
To use both remote and manual functions the main on/off switch must be in the
‘on’ position.
The flame will always be on when the appliance is on.
In order to protect the product from becoming too hot, there is an 8 second delay
when turning on the heater. There is also an 8 second delay when turning off the
heater.
●
Operating by Manual Button
Main switch
Heater button
Flame button
NOTE
：
Main switch
This switch must be in the “ON” position for any of the functions including the remote to work.
Flame button
By pressing the FLAME button, the unit will cycle through four flame effects.
Heater button
Pressing once turns the fan on and 8 seconds later the low heat comes on. (Pilot lights
illuminated
●○
) Pressing again turns on the high heat. (Pilot lights illuminated
●●
)
Pressing third time turns the heat off. 8 seconds later the fan switches off (Pilot lights
illuminated
○○
)
