12
LT4636 (ISS 13)
SECTION FOUR Cleaning (user instructions)
Warning: -Before you clean any part of the appliance ensure that the appliance is turned off and cold.
CLEANING: BRASS DECORATIVE TRIM & FRET
The finish of the brass trim and fret will from time to time need cleaning with a proprietary brass cleaner i.e.:
Brasso
The trim and fret should be removed for cleaning. The fret should be removed before removing the trim, which
is held in place by four magnetic strips.
CLEANING: BLACK PAINTED or CHROME EFFECT SURFACES
These surfaces should be dusted regularly and any marks removed with a soft cloth.
Abrasive or chemical cleaner should never be used.
CLEANING COALS AND PEBBLES
Important: - Refer to the Health & Safety Notice located on page 5 of this booklet before cleaning or replacing any
refractory material.
The coals, pebbles and ceramic parts are delicate and they should be handled with great care.
The loose coals and pebbles may be removed for cleaning. They can be brushed very gently with a soft brush to
remove dust or any deposits.
Care should be taken to avoid contact with the refractory lining, this is a delicate surface and should not be
wiped or rubbed.
A vacuum cleaner may only be used after all the loose coals and pebbles have been removed.
SECTION FIVE General Points (user instructions)
Like all appliances incorporating an aerated burner a Low frequency noise may be heard, particularly on the Low setting,
this is quite normal and does not affect the operation of the appliance.
It is advised that the fire is serviced annually this is more likely to provide trouble-free operation.
It is important that: -
The chimney or flue is checked annually to ensure clearance of combustion products.
The fire does not normally require purpose-built ventilation but if for any special reason purpose-built
ventilation is provided it should be checked periodically to ensure freedom from obstruction.
Any debris from the chimney or flue should be removed. The fire should be allowed to cool for three to four
hours before it is removed.
Rubbish must not be thrown onto the fuel bed under any circumstances.
The cast fire front must be positioned in front of the fire whilst it is burning
The only user removable parts are: -
Cast fret
Loose fuel bed components
Decorative effect trim
