10
6a.3
Press “
MOOD LIGHT
” butto
n to cycle through the 13 colours of fuel bed or a colour-cycle mode and Off setting.
6a.4
Press “LIGHTS ON/OFF” to turn on or turn off t
he flame, fuel bed and mood light.
Note: The controls on appliance will lose the memory for all function settings when the switch is set to the Off Position.
When the remote runs out of power or when you change the batteries, only the flame function will lose memory and will
not affect the timer settings, however, the clock may need adjusting.
9.
REMOTE CONTROLS
NOTE: This is thermostatic remote control. The remote should be in the same room as fireplace and placed on a flat surface.
It must be placed away from the fire so the hot air will not blow on it and affect thermostatic reading.
The communication frequency between the appliance and remote has already been set up. If
you cannot use the remote with the appliance, please follow instructions Step.6b36 to initiate
this connection in point.
Standby for Remote Handset
6b.1 The screen is as right picture when the remote handset on standby condition.
Turn on/off
6b.2 Press
to turn on the flame effect and turn off flame and heater under the normal
mode.
6b.3 Press
to turn on/off the flame effect under daily and weekly timer mode.
Flame Effect
6b.4 Press to enter the flame effect adjustment screen.
6b.5 Press the
‘←’
and
‘→’
button to select the 3 kinds of flame effect.
6b.6 Press the
‘+’
and
‘
-
’
button to select the 5 brightness of flame effect and OFF settings.
