Charles 93-12PREG Скачать руководство пользователя страница 11

 LT-12PREG-1

11

 Charles Industries, Ltd. All rights reserved. Printed in the United States of America.

WARRANTY & CUSTOMER SERVICE

Warranty

CHARLES MARINE PRODUCTS warrants the Alternator Regulator will be free from defects in materials and
workmanship which cause mechanical failure for two (2) years, as set forth in the Limited Warranty. Review this
warranty carefully for information on what is covered by its terms. Complete and return the warranty registration
card within ten (10) days of purchase to establish proof of ownership and validate the warranty coverage. You
must provide notice of any alleged defect in material of workmanship within thirty (30) days of discovering the
problem, and within the warranty period. Follow the procedure outlined below to obtain warranty service.

Warranty Service and Repair

If the unit fails to operate properly after following all the instructions in the manual, or if the Alternator Regulator
requires service, take the following steps:

1.

Contact Charles Marine Products Customer Service and obtain a ”Returned Goods Authorization” (RGA) number
and a Service Center address

2.

Ship or mail the Alternator Regulator together with the RGA to the appropriate Service Center. Shipping costs to
and from the Service Center are your responsibility

3.

When service is completed, Charles Marine Products will return the Alternator Regulator to you.

Customer Service

If technical assistance or customer service is required, contact Charles Marine Products at:

(847) 806–6300 (Customer Service)
(847) 806–6352 (FAX)
(905) 821–7673 (Canada)

For correspondence only, mail to:

Charles Marine Products
Charles Center
5600 Apollo Drive
Rolling Meadows, IL 60008–4049

SPECIFICATIONS

The specifications for the Alternator Regulator are listed in Table 7.

Table 7.  Alternator Regulator Specifications

Feature

U.S.

Metric

Input Voltage

12/24 VDC (nominal)

Input Current

15 Amps

Output Current

15 Amps

Operating Temperature

32

°

to 140

°

 F

0

°

to 60

°

 C

Approximate Weight

1 pound

0.4356 kilograms

Height

5.85 inches

14.86 centimeters

Width

6.70 inches

17.02 centimeters

Depth

1.65 inches

4.2 centimeters

    

Содержание 93-12PREG












Отзывы: