Charles Machine Works Ditch Witch RT125 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 231

Charles Machine Works Ditch Witch RT125 Скачать руководство пользователя страница 18

RT125 Operator’s Manual

Safety - 17

Safety Alert Classifications

Safety Alert Classifications

These classifications and the icons defined on the following pages work together to alert you to situations
which could be harmful to you, jobsite bystanders or your equipment. When you see these words and
icons in the book or on the machine, carefully read and follow all instructions. YOUR SAFETY IS AT
STAKE.

Watch for the three safety alert levels:

DANGER

,

WARNING

and

CAUTION

. Learn what each level

means.

indicates a hazardous situation that, if not avoided, will result in death or serious injury. This

signal word is to be limited to the most extreme situations.

indicates a hazardous situation that, if not avoided, could result in death or serious injury.

indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

Watch for two other words:

NOTICE

and

IMPORTANT

.

NOTICE

indicates information considered important, but not hazard-related (e.g., messages relating to

property damage).

IMPORTANT

can help you do a better job or make your job easier in some way.

«
...
16
17
18
19
20
...
»

Содержание Ditch Witch RT125








































































































































































































































Отзывы:

Нет отзывов